Karbon-CL
IMAGING SUPPORT
> Products
> News
> Sales
> Support
> About

Karbon is the world's first four-camera PCI Express frame grabber. With an x8 PCI Express interface, the board can DMA at speeds of up to two gigabytes per second.

The Karbon-CL

Karbon-CL is the world's first four-camera PCI Express frame grabber. It can simultaneously acquire from up to four Base CL cameras or two Full CL cameras. It is built on top of BitFlow's FlowThru technology, which provides zero latency access to data, super low CPU usage, and unlimited DMA destination size. The Karbon-CL is the first member of BitFlow's Karbon family, a platform that will host a wide variety of virtual frame grabbers. These virtual frame grabbers can be customized to meet your specific needs.

The Karbon-CL has been designed with two main applications in mind. First, in situations where more than one camera is needed, the Karbon-CL can reduce both the system cost and the hardware footprint by its ability to acquire from up to four cameras. Second, in situations where extremely high data rates and/or frame rates are required, the Karbon-CL has been designed to acquire up to 128 bits at 85 MHz pixel clock rate and DMA at data rates up to 2.0 GB/S.

Features

Virtual Frame Grabber

One of the exciting new features of the Karbon-CL is the support for virtual frame grabbers. A virtual frame grabber, from the software and interface point of view, is identical to a normal frame grabber. The difference is that the Karbon architecture can support a wide variety of different virtual frame grabbers with no change in the hardware. This design can also support different numbers of frame grabbers on the same platform. For example, the Karbon-CL can be configured as two full Camera Link frame grabbers, or it can be configured as four base Camera Link frame grabbers. The software will see two or four (respectively) completely independent frame grabbers. The Karbon-CL could even look like one "double full" frame grabber (up to 160 bits), if and when the camera manufacturers come up with one. Further, the board become an interface for the completely non-standard device that you might be designing in your lab, just lets us know your requirements. Switching between the different virtual grabbers only requires a press of a button in our configuration tool. As the Karbon family expands, you'll see more new and exciting uses of this virtual frame grabber architecture.

FlowThru Architecture

For the last 10 years, BitFlow's camera interface products have been built around our revolutionary FlowThru architecture. Comprised of a user-programmable Video Pipeline, a flexible Camera Control Unit, efficient high-speed video FIFOs and a highly-optimized scatter/gather DMA engine, the FlowThru architecture allows the Karbon-CL to control, acquire, reformat and transfer video data directly into the user's application at camera speeds with zero latency or CPU usage. Our FlowThru architecture has been continuously optimized and enhanced to support a wide variety of imaging applications such as document/package processing, semiconductor, continuous web inspection, sequence capture and motion analysis and can easily be adapted to the specific needs of your application.

PCI Express Interface

The Karbon-CL uses a x8 PCI Express bus interface. The PCI Express bus offers huge increases in DMA performance over the PCI bus. However, what is less well known is that the PCI Express bus is always peer to peer. This means the the Karbon-CL does not share the bus with any other devices. In most motherboard architectures, it will talk directly to the PCI chipset that is on the memory bus. This direct connection equates to higher sustained DMA bandwidths regardless of system load. Also, most motherboards support concurrent full DMA speed on all of their PCI Express slots. The board will work in any slot that it fits in. This means not only x16 and x8 slots, but also, as is becoming the trend, x4 and x1 slots that use x16 connectors. Performance will be degraded in x1 and x4 slots, but the board will work fine in applications that don't require maximum data rate.

Camera Control and I/O

Supported by a GUI camera file editing utility (CamEd), the Karbon can acquire fixed or variable size images and features a programmable ROI (Region Of Interest) sub-windowing capability. The board provides a full set of camera control signals (CC1, CC2, CC3, CC4) and sync inputs (LVAL, FVAL, PCLK, trigger and encoder) for each camera connected to the board (up to four cameras can be connected). These signals are completely independent, although there are provision for driving all cameras from a signal set up encoder/trigger signals. There is also a large number of programmable general purpose outputs and inputs that are not tied to the camera's timing. The Karbon-CL board, as with our past interface products, supports not only simple triggering modes but also complicated, application-specific triggering and control interactions with your hardware environment.

© 2014 BitFlow, Inc. | 400 West Cummings Park, Suite 5050, Woburn, MA 01801 USA | Phone: 1-781-932-2900 | Site comments > webman@bitflow.com
Home > Products > Karbon-CL

Karbon-CL Models

KBN-PCE-CL2-D

KBN-PCE-CL2-F

KBN-PCE-CL4-D

KBN-PCE-CL4-F

KBN-PCE-CL4-SP

SDK 5.00 or later required