<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>

<nifamily familyname="BitFlow" displayname="BitFlow">
</nifamily>
</nicomment>
<nierror code="5000">
Error finding the specified board type and number installed in the system.
</nierror>
<nierror code="5001">
Error opening board.
</nierror>
<nierror code="5002">
The board must be opened before calls to other BitFlow VIs are made.
</nierror>
<nierror code="5003">
Error assigning memory to Buffers.
</nierror>
<nierror code="5004">
Error Setting up Acquisition.
</nierror>
<nierror code="5005">
Acquisition setup must be called first before calling this vi.
</nierror>
<nierror code="5006">
Error waiting for frame. A possible cause could be a timeout, try increasing the timeout value in the camera file.
</nierror>
<nierror code="5007">
The grab command failed.
</nierror>
<nierror code="5008">
The board did not close properly.
</nierror>
<nierror code="5009">
Error aborting acquisition.
</nierror>
<nierror code="5010">
Error resetting acquisition.
</nierror>
<nierror code="5011">
There must be at least two buffers allocated for acquisition.
</nierror>
<nierror code="5012">
Error while performing Buffer Cleanup.
</nierror>
<nierror code="5013">
Buffer Setup must be called first before calling this vi.
</nierror>
<nierror code="5014">
Invalid Aqcuisition Engine.
</nierror>
<nierror code="5015">
Error setting Frame Size.
</nierror>
<nierror code="5016">
Register not on this board.
</nierror>
<nierror code="5017">
Error in Register Poke.
</nierror>
<nierror code="5018">
Error getting Register Name.
</nierror>
<nierror code="5019">
Error Reading from Register.
</nierror>
<nierror code="5020">
Error Writing to Register.
</nierror>
<nierror code="5021">
Error getting buffer status.
</nierror>
<nierror code="5022">
Function not supported for sequential acquisition mode.
</nierror>
<nierror code="5023">
Error Reading NTG values.
</nierror>
<nierror code="5024">
Error getting the trigger mode.
</nierror>
<nierror code="5025">
Error setting the trigger mode.
</nierror>
<nierror code="5026">
Error weaving images into the MultiBuffer.
</nierror>
<nierror code="6000">
Error assigning memory to Buffers.
</nierror>
<nierror code="6001">
Error Setting up Acquisition.
</nierror>
<nierror code="6002">
Error Stopping Acquisition.
</nierror>
<nierror code="6003">
Invalid Acquisition mode choice.
</nierror>
<nierror code="6004">
Acquisition mode needs to be set to Sequential.
</nierror>
<nierror code="7000">
Error initializing CL Serial Port.
</nierror>
<nierror code="7001">
Error Getting Port Info.
</nierror>
<nierror code="7002">
Error Getting Supported Baud Rates.
</nierror>
<nierror code="7003">
Error setting Serial Baud Rate.
</nierror>
<nierror code="7004">
Error reading from serial port.
</nierror>
<nierror code="7005">
Error Writing to serial port.
</nierror>
<nierror code="7006">
Error getting Number of Bytes available.
</nierror>
<nierror code="7007">
Error getting number of ports.
</nierror>
<nierror code="7008">
Error flushing the port.
</nierror>
<nierror code="7009">
Error getting error text.
</nierror>
<nierror code="8001">
Error opening Device Handle.
</nierror>
<nierror code="8002">
Device Handle not opened.
</nierror>
<nierror code="8003">
Error getting number of nodes.
</nierror>
<nierror code="8004">
Error getting BFGTL node name.
</nierror>
<nierror code="8005">
Error opening BFGTL node.
</nierror>
<nierror code="8006">
Error retrieving BFGTL node property.
</nierror>
<nierror code="8007">
Error reading BFGTL node value.
</nierror>
<nierror code="8008">
Error writing BFGTL node value.
</nierror>
<nierror code="8009">
Error closing device handle.
</nierror>
</nidocument>