News

Vision 2018, Stuttgart, Germany, November 6-8, 2018

BitFlow recently exhibited at Vision in Stuttgart, Germany.

Our latest released CoaXPress frame grabber, the Claxon, was on display.  The Claxon, which can run at up to 12.5 Gb/S, is our CXP-12 frame grabber which will be available in Q2 2019.

A demo showcasing our Cyton CXP4 with 4 single channel CXP cameras was on display.  These cameras were focused in on our Aon-CXP, single link frame grabber.  Cameras on display included ISVI, CIS, Adimec and Sentech.

The Cyton CXP HALCON demo was front and center catching the attention of many attendees.

Located in Hall 1 Aisle A we had a prime location for lots of booth traffic.

 

If you attended the show and did not get a chance to stop by our booth, please visit us online, submit an inquiry or give us a call at 781-932-2900.

BitFlow at CRAV in Santa Clara, CA 2018

BitFlow recently exhibited at the AIA CRAV conference at the Hyatt Regency in Santa Clara, California.

Cameras from ISVI, CIS, Adimec and Sentech were used in a demo highlighting our Cyton-CXP4.

Our BitBoxAxion-CLAon-CXPand Cyton CXP4 were all on display.

If you attended the show and did not have a chance to stop by tabletop #3, please visit us online, submit an inquiry or give us a call at 781-932-2900.

BitFlow Unveils First CXP v2.0 Frame Grabbers at VISION 2018 in Stuttgart

WOBURN, MA, OCTOBER 30, 2018 — BitFlow, a global innovator in frame grabber technology for machine vision, announced today that it will display its first generation of CXP v2.0 frame grabbers at the upcoming VISION Show scheduled for November 6-8, 2018, in Stuttgart, Germany.
Over the past two years BitFlow has furnished input and direction to the Japan Industrial Imaging Association (JIIA) on the finalization of the new CoaXPress v2.0 (CXP v2.0) standard — an upgrade that will double the speed of the interface used in the inspection of semiconductors, food and beverage, and pharmaceuticals, among others.
“By coordinating with the JIIA on a standardization roadmap BitFlow is in a better position to develop frame grabbers that will reliably perform up to full potential,” explained Donal Waide, Director of Sales for BitFlow, Inc. “Because BitFlow engineers have been actively involved in every detail of CXP v2.0 development we can ensure our customers that the frame grabbers we are introducing at VISION are fully tested and certified to meet the high quality expectations of system designers.”
BitFlow’s first CXP 2.0 frame grabbers can be viewed at BitFlow’s VISION booth located in Hall 1, Stand 1A06. Additionally, BitFlow will be conducting live demonstrations of its 2.0-ready Aon-CXP and Cyton-CXP CoaXPress frame grabbers, along with its advanced Camera Link models. Another showstopper at VISION will be the BitFlow BitBox, an I/O device that provides an unprecedented 36 inputs and 36 outputs in a compact, DIN-rail mounted form factor supporting TTL, LVDS, open collector, opto-isolated and 24V signaling.
NEEDED UPGRADE IN SPEED
Introduced a decade ago, CoaXPress standard v1.1.1 is currently supported by over 50 vendors of cables, connectors, intellectual property, transceivers, cameras, frame grabbers, simulators, range extenders and software. CXP v2.0 will double the current 6.25 Gbps image data transfer rate to 12.5 Gbps, therefore allowing for higher frame rates or larger camera resolutions. The JIIA and BitFlow have concluded CXP v2.0 is necessary for manufacturers to achieve the extremely high levels of quality, cost efficiencies and productivity needed to gain a competitive edge in the global economy.
Among its many proven advantages, CoaXPress allows video, camera control for triggering, and up to 13W of power to be transferred without latency on off-the-shelf coaxial cables up to 100 meters in length or approximately three times that of USB3 or GigE Vision. Also, because CoaXPress relies on standard coax, many such cables previously installed in legacy defense and security systems utilizing analog cameras can be re-used for migrating to digital imaging, eliminating the cost of new cabling.
For more information, please call 781-932-2900.

BitFlow in Orlando, FL 2018

BitFlow recently exhibited at the SPIE DCS Show at the Gaylord Palms Resort and Convention Center in Orlando, Florida.

Our BitBox, Axion-CL, Aon-CXP, Cyton CXP4 and Neon CLQ were all on display.

If you attended the show and did not have a chance to stop by our booth, please visit us online, submit an inquiry or give us a call at 781-932-2900.

BitFlow in Boston, MA 2018

BitFlow recently exhibited at the Vision Show Boston at the Hynes Convention Center.

We had a great location at the entrance to the show.

Our Cyton CXP and HALCON demo caught the attention of many show attendees.

A CoaXPress camera demo highlighting our Aon-CXP and Cyton CXP4 was on display along with a sequence capture demo.  Cameras from JAI, IO Industries and Sentech were included in these demos.

Our Neon CLQ, Aon-CXP, Axion 1xE and Cyton CXP4 frame grabbers were all on display.

The show was well attended and there was a lot of traffic at our booth.

If you attended the show and did not have a chance to stop by our booth, please visit us online, submit an inquiry or give us a call at 781-932-2900.